Profitec Pro 500:
Espresso Settings & Dial-In Guide
The Profitec Pro 500 is a heat exchanger espresso machine, designed for prosumer use. It features e61 solenoid (passive) pre-infusion, a 58mm portafilter. With PID temperature control (88–98°C), you can fine-tune extraction temperature alongside grind size for precise dial-in. The adjustable OPV lets you fine-tune brew pressure beyond the factory setting. Allow 25+ minutes of warm-up time for temperature stability.
At a glance
Machine specifications
Recommended starting parameters
Starting recipe for Profitec Pro 500
Dose
17–21g
Ratio
1:1.8–1:2.5
Time
25–35s
These are starting points — adjust based on your beans, roast level, and taste preferences.
Known limitations
HX — flush technique still beneficial despite PID
Dial-in tips for the Profitec Pro 500
HX boiler with PID, E61 group, pressure gauge.
PID controls steam boiler temperature.
Can suggest cautious temp targets.
Pressure gauge standard.
Dialing in on the Profitec Pro 500?
Grindset gives you machine-specific coaching — log your shots and get tailored adjustments for the Pro 500.
Try Grindset freeProfitec Pro 500
Manufacturer
Profitec
Type
Heat Exchanger
Use Case
Prosumer
Confidence
High