DF (Turin) DF64 Gen 2:
Espresso Grind Settings & Guide
The DF (Turin) DF64 Gen 2 is an electric flat burr grinder with 64mm burrs. It features stepless adjustment and is designed for both espresso and filter use. With moderate retention (~0.5g) and a single-dose-friendly design, it's a popular choice from DF (Turin).
At a glance
DF (Turin) DF64 Gen 2 specs
Burr Type
Flat 64mm
Adjustment
Stepless
Retention
Medium (~0.5g)
Single Dose Friendly
Yes
Espresso Capable
Yes
Primary Use
Espresso & Filter
Power
Electric
Espresso starting range
Where to start for espresso
0-90 numbered dial. Espresso: 0-20 with stock burrs. Start around 15-20 for medium roasts, 10-12 for light. Lower = finer. Range shifts with aftermarket burrs.
the stepless adjustment ring (small turn for fine changes — no fixed scale)
Starting point only — adjust based on your beans, roast level, dose, and target yield.
Quirks & tips
Popular value-for-money 64mm flat burr
Fits SSP, Lagom, and other aftermarket 64mm burrs
Single-dose workflow with WDT recommended
Detailed notes
64mm flat burr. Stepless adjustment. Single-dose workflow standard. Medium retention. Very popular for value. Aftermarket burr upgrades common. Espresso and filter capable.
Dialing in with the DF (Turin) DF64 Gen 2? Grindset speaks your grinder's language.
Tell Grindset which grinder you use and it gives you adjustment advice in DF (Turin)-specific terms — dial numbers, not generic "grind finer" advice.
Try Grindset freeDF (Turin) DF64 Gen 2
Manufacturer
DF (Turin)
Burrs
Flat 64mm
Adjustment
Stepless
Retention
Medium (~0.5g)
Primary Use
Espresso & Filter