Baratza Encore:
Espresso Grind Settings & Guide
The Baratza Encore is an electric conical burr grinder with 40mm burrs. It features stepped adjustment (~35µm per step) and is designed primarily for filter and pour-over brewing. With moderate retention (~1.5g) and a hopper-fed design, it's a popular choice from Baratza. Note: this grinder is not typically recommended for espresso without modification.
At a glance
Baratza Encore specs
Burr Type
Conical 40mm
Adjustment
Stepped
Step Size
~35µm per step
Retention
Medium (~1.5g)
Single Dose Friendly
No
Espresso Capable
No
Primary Use
Filter / Pour-over
Power
Electric
Espresso starting range
Where to start for espresso
Settings 5–10 for espresso — but not ideal for espresso use
numbered setting (1–40, lower = finer — e.g. 'try setting 10')
Starting point only — adjust based on your beans, roast level, dose, and target yield.
Quirks & tips
Designed for filter — espresso results are inconsistent
High retention — purge 2–3g before shots
Very popular entry-level grinder but not ideal for espresso
Detailed notes
40mm conical burr entry-level. 40 steps. Not recommended for espresso — the grind range and step size make dialing in very difficult. If user has an Encore for espresso: give conservative advice and acknowledge limitations.
Dialing in with the Baratza Encore? Grindset speaks your grinder's language.
Tell Grindset which grinder you use and it gives you adjustment advice in Baratza-specific terms — exact steps, not generic "grind finer" advice.
Try Grindset freeBaratza Encore
Manufacturer
Baratza
Burrs
Conical 40mm
Adjustment
Stepped
Retention
Medium (~1.5g)
Primary Use
Filter / Pour-over